Sony STR-DA7100ES Operating Instructions - Page 44
: Connecting the AC power cord, Performing initial setup, operations - power consumption
![]() |
View all Sony STR-DA7100ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5: Connecting the AC power cord Connect the supplied AC power cord to the AC IN terminal on the receiver, then connect the AC power cord to a wall outlet. AC power cord (supplied) * * A several space is left between the plug and the rear panel even when the power cord is inserted firmly. The cord is supposed be connected this way. This is not malfunction. AC IN terminal AC OUTLET** • Make sure that the total power consumption of the component(s) connected to the receiver's AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. This may cause a malfunction. Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. 1,2 3 To the wall outlet ** The configuration, shape, and number of AC outlets will vary according to the area code of receiver's you purchased. Notes • The AC OUTLET(s) on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on. 44GB 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. "ENTER to Clear ALL" appears on the display for 10 seconds.
![](/manual_guide/products/sony-strda7100es-operating-instructions-044bfca/44.png)