Sony STR-DA7100ES Operating Instructions - Page 33
Function for conversion of, video signals, Video INPUT/OUTPUT jack to be, connected
![]() |
View all Sony STR-DA7100ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Getting Started Video INPUT/OUTPUT jack to be connected The image quality depends on the connecting jack. Refer to the illustration that follows. Select the connection according to the jacks on your components. TV monitor etc., INPUT jack HDMI COMPONENT VIDEO S-VIDEO VIDEO Receiver MONITOR OUT jack HDMI COMPONENT VIDEO S-VIDEO VIDEO Signal processing HDMI COMPONENT VIDEO* S-VIDEO VIDEO Receiver INPUT jack Video component OUTPUT jack HDMI COMPONENT VIDEO S-VIDEO VIDEO High quality image * When VIDEO CONVERT is set to "ON" in the CUSTOMIZE menu (page 71), only 480i/576i component video input signals are output. Component input video signals of 480p/576p, 720p and 1080i are not output correctly. The component video input signals output from the COMPONENT VIDEO MONITOR OUT jack will be output as is when VIDEO CONVERT is set to "OFF". Notes • Connect image display components such as a TV monitor or a projector to the MONITOR OUT jack on the receiver. You may not be able to record, even if you connect the recording components. • Turn on the receiver when the video and audio of a playback component are being output to a TV through the receiver. If the power supply of the receiver is not on, neither video nor audio is transmitted. the MONITOR OUT jack as shown in the illustration. • Video signals can be output as HDMI video, component video and S-video signals. • S-video signals can be output as HDMI video, component video and video signals. • Component video signals can be output as HDMI video, S-video and video signals. Function for conversion of video signals This receiver is equipped with a function for converting video signals. You can output the video signal after connecting this receiver via You can switch the function for converting video signals in VIDEO CONVERT (page 71). The initial setting is "ON." When VIDEO CONVERT is set to "OFF," the video signals are not converted. continued 33GB
![](/manual_guide/products/sony-strda7100es-operating-instructions-044bfca/33.png)