Sony STR-DA7100ES Operating Instructions - Page 121

3 Referring to the table below, press the input button for the category you want. The indicator turns off when a valid button is pressed. Example: Press DVD twice. 4 Press SOURCE. The new assignment is registered. The indicator slowly lights up twice, then goes off. To cancel Press RM SET UP during any step. Tip If the operation is unsuccessful, the indicator flashes four times and the remote automatically exits the button assignment mode. In this case, the new assignment is not registered and the previous setting remains. Notes • If you do not press a button during step 2 through 4 within 60 seconds, the remote automatically exits the button assignment mode. Start again from step 1. • In step 3, if you press the same button more than the possible number of categories that can be selected, only the last category is registered for the new assignment. Valid buttons and the corresponding categories Corresponding categories VTR-1 VTR-2 VTR-3 VTR-4 VTR-5 VTR-6 DVD player LD player TV Press VIDEO 1 once VIDEO 2 once VIDEO 3 once VIDEO 1 twice VIDEO 2 twice VIDEO 3 twice DVD once DVD twice TV/SAT once Corresponding Press categories SAT TV/SAT twice Tape deck-A TAPE once Tape deck-B TAPE twice MD deck MD/DAT once DAT deck MD/DAT twice CD player-1 SA-CD/CD once CD player-2 SA-CD/CD twice CD player-3 SA-CD/CD three times VIDEO CD player VIDEO 1, then SA-CD/ CD To clear all remote button assignments Hold down RM SET UP, then press ?/1. The remote is reset to its factory-settings. 121GB Using the Remote