Sony UPCR20L Operating Instructions - Page 17
Loading the Paper Roll and Ink Ribbon, ribbon, Ink Ribbon - cleaning ribbon
View all Sony UPCR20L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 2 Preparations Loading the Paper Roll and Ink Ribbon • Hold the paper roll with both hands so that you do not drop it, because it is heavy. Dropping may result in an injury. Handling the paper roll and ink ribbon Notes • Each printing pack contains two sets of the ink ribbon and paper roll combination. Use the ink ribbon and the paper roll in the carton as a set. Do not mix with other varieties of ribbon or paper roll. (See "Ink Ribbon and Paper" on page 78.) • The number of sheets that can be printed differs depending on the printing pack. One set of the ink ribbon and paper roll allows you to print the following number of sheets. Printing 2UPCpack R203 series 2UPCR204 series 2UPCR205 series 2UPC-C26/ 2UPCR206 series Print 770 sheets 700 sheets 400 sheets 350 sheets capacity Print size 89 × 127 102 × 152 127 × 178 152 × 203 mm mm mm mm 3.5 × 5 inches 4×6 inches 5×7 inches 6×8 inches • Do not replace the printing pack if it has only been partially used. If the paper roll or ink ribbon is replaced after only partial use, the above print capacities are not guaranteed. • When setting the paper roll down, place it vertically as shown. If you place the paper roll horizontally, the paper may roll around and fall. This may cause an injury. Hold the paper roll with both hands. • Do not detach the black and white spools of the ink ribbon until you start loading the ink ribbon. • An IC chip is embedded in the black spool. Do not touch the terminals on the IC chip with your hands or metal objects, and do not dent, drop, or otherwise apply shock to the IC chip. Doing so may cause the ink ribbon to become unusable. White spool Black spool IC chip Before Loading the Paper Roll and Ink Ribbon Confirm that the unit is powered on. If not, turn the power on. Otherwise, the automatic paper feeding may not be done correctly after loading of the paper roll and ink ribbon is completed. Clean the thermal head and rollers regularly, whenever you load a new paper roll and ink ribbon. For detailed information on cleaning, see "Cleaning the Interior" on page 50. Note If you use the 2UPC-R204 series, 2UPC-C26 series, or 2UPC-R206 series Printing Pack with the 152-mm (6-inch) paper width after using the 2UPC-R203 series or 2UPC-R205 series Printing Pack with the 127-mm (5-inch) paper width, white stripes may appear on either side of printouts. 17 Loading the Paper Roll and Ink Ribbon