Sony UPCR20L Operating Instructions - Page 71
Adjusting the Image Quality for the Expansion Printer, Printing From a Computer - drivers
View all Sony UPCR20L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Note This screen does not appear if the paper loaded inside the expansion printer and unit are the same size. Printing From a Computer When a commercially available USB cable is used to connect the unit to a computer, data sent from the computer can be printed out using this unit. When the USB cable is plugged in, the indication "PC MODE" is shown on the display of the unit. In this condition, the touch panel is inactive. If you select the paper size that is loaded inside the expansion printer from the print size selection screen, the expansion printer will be used for printing. If paper of the same size is loaded inside both the expansion printer and the unit, the printer with less remaining paper will be used for printing. The following screen appears while printing from the expansion printer. Installing the Printer Driver If the unit is to be controlled from a computer, you must install the supplied printer driver on the computer before connecting the unit to the computer for the first time. For details on installation, refer to the installation guide and the Readme file on the supplied CD-ROM. Notes • For the latest information on the printer driver, please visit the UP-CR20L support page at http:// www.sony.net/snaplab. • The supplied printer driver does not support printing via a network. Computer Connection Setting You can select whether to receive commands from a computer. To enable commands from a computer, touch the [ON] button for [PC Connection] in the System tab of the administration screen. Chapter 6 Operation Adjusting the Image Quality for the Expansion Printer You can adjust the image quality for the expansion printer from the unit. For details, see "Setting the Image Quality for an Expansion Printer" on page 54. When [OFF] is selected, commands from computers connected to the unit via USB cable will be ignored. 71 Printing From a Computer