Sony UPCR20L Operating Instructions - Page 47
Setting Image Preload, Entering Passwords Using Memory Cards (Remote Password Input
![]() |
View all Sony UPCR20L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 4 Advanced Settings Setting Image Preload J Expansion CompactFlash card required You can select whether data for ordered images is loaded onto the unit before printing begins. When image preload is enabled, data for ordered images is loaded from a memory card or CD/DVD onto the expansion CompactFlash card immediately before printing begins. When loading is complete, the memory card and CD/DVD removal screen appears. As users must remove their memory cards before printing begins, this function minimizes the risk of users forgetting their memory cards. Notes • When this function is enabled, the number of images that can be printed in a single order is limited to the available capacity on the expansion CompactFlash card. When printing index prints, split image prints, or other such prints that include multiple images on a single sheet, each of these images are copied onto the expansion CompactFlash card. Therefore, be sure to use an expansion CompactFlash card with a large capacity. • Images may take longer to load before printing, depending on the number and size of images ordered. 1 Open the System tab on the administration screen. 2 Touch the [ON] button for [Load images before printing]. Hint When image preload is disabled, images are loaded from a memory card or CD/DVD during printing. When printing is complete, a message prompting the user to remove their memory card or CD/DVD appears on the screen. Entering Passwords Using Memory Cards (Remote Password Input) J Expansion CompactFlash card required When the checkout password is requested, instead of using the onscreen numeric keypad to enter the password, it is possible to use a memory card or a USB memory in which the password has previously been stored. In order to do so, it is necessary to first create a file containing the password (the password file) on the administration screen, and then store that file in a memory card or USB memory. The memory card or USB memory containing the password file can be read by inserting it into a card reader connected to the USB port (host) located at the top of the unit, or into the USB port (host) itself. The memory card slot on the front of the unit can also be used. Creating a password file 1 Make sure that an expansion CompactFlash card has been inserted. 2 On the Administration tab of the administration screen, set the checkout password and then touch the button. The password file (named "snaplab.txt") is created in the root folder of the expansion CompactFlash card. The file contents are described below. [password] pass=**** **** = Password that was set 3 Remove the expansion CompactFlash card, and copy the password file to the root folder of the memory card to be used. The password file cannot be used as is, stored in the expansion CompactFlash card. Note No password file is created when setting the administrator password. 47 Setting Image Preload / Entering Passwords Using Memory Cards (Remote Password Input)
![](/manual_guide/products/sony-upcr20l-operating-instructions-1b5c8fc/47.png)