Sony UPCR20L Operating Instructions - Page 26
Removing the Paper Roll and Ink Ribbon, ribbon and paper roll are completely used up. Even if
View all Sony UPCR20L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 2 Preparations 2 Enter the administrator password using the numeric keypad, and touch [OK]. (The factory default setting for the password is "9999.") The ribbon door unlocks, and the error message screen returns. The key icon at the top right changes to "!," indicating that the door is unlocked. 2 Remove and empty the scrap receptacle. Removing the Paper Roll and Ink Ribbon Note The above message is set to appear before the ink ribbon and paper roll are completely used up. Even if there is some ink ribbon and paper remaining, be sure to load a new ink ribbon and paper roll. 1 Remove the output cover and output tray. Note If the scrap receptacle becomes too full, scraps that are cut off may be unable to eject. This may result in malfunction. Be sure to empty the scrap receptacle each time you replace the paper roll. 3 Press and lower the paper door lever, hold the paper door at the center portion, and pull the door forward until it locks into the open position. 26 Replacing the Paper Roll and Ink Ribbon