Sony UPCR20L Operating Instructions - Page 32
Basic Settings Used in All Operation Modes, Selecting the Language
![]() |
View all Sony UPCR20L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chapter 3 Setup Basic Settings Used in All Operation Modes This section explains the basic settings that are used in all of the operation modes. Selecting the Language This procedure selects the language that is used for all of the other settings and operations. The factory default setting is English. 1 Open the Screens tab on the administration screen. 2 Touch the [1] button under [Language]. A list of languages appears. Specifying the languages available for selection during operation J Applicable modes: Full mode, Quick Print mode When using Full mode or Quick Print mode, it is possible to specify up to five additional languages to be made available for use during operation. If more than one language is specified, the user can select one of the languages when they start to place an order. To specify additional languages to be made available for use during operation, touch the [2] through [6] buttons and select the desired language from the list that appears. If a language is selected for one button, it is not available for selection for another button. To cancel a setting, touch [OFF] in the language list. Notes • Additional languages are not available in Event mode. • The administration screen and error messages are always displayed in the language specified in position [1]. • You cannot select [OFF] for position [1]. • If you only set position [1], the language selection screen will not appear during orders. Hint If you want to change the positions of two selected languages (for example, you have selected, "[1] English" and "[2] Japanese," and you want to change the settings to "[1] Japanese" and "[2] English"), you need to first cancel the setting of one of the languages. 1 Touch [2] and select [OFF] from the language list. 2 Touch [1] and then select "Japanese." 3 Touch [2] and select "English." 3 Touch the language that you want to select, and then touch the [OK] button. The display changes to the selected language. 32 Basic Settings Used in All Operation Modes
![](/manual_guide/products/sony-upcr20l-operating-instructions-1b5c8fc/32.png)