Sony UPCR20L Operating Instructions - Page 37

Chapter 4 Advanced Settings Advanced Settings 4 Chapter Band Pricing You can vary the price per print based on the number of prints ordered. This allows you to offer discounts for large volume printing. Prices can be set for each print size. You can also set additional fees for matte finishing and special prints such as index or border prints. The additional fee for special prints is added to the band price for each print. Note If band prices are not configured, the prices configured for [Normal] will be applied. Items for which [Normal] prices apply will be displayed with the prices in parenthesis. Band price setting example 1 to 10 prints 11 to 50 prints 51 prints or more 3 × 5" $ 0.30 $ 0.25 $ 0.20 4 × 6" $ 0.30 $ 0.25 $ 0.20 5 × 7" $ 0.40 $ 0.35 $ 0.30 6 × 8" $ 0.50 $ 0.45 $ 0.40 1 Open the Pricing tab on the administration screen. 2 Touch the [Band] button. 3 Touch the button. The following screen appears. 4 Under [Band Price], touch the button for the size that you want to set. 5 Set up the band pricing for the size that you selected. Lower Qty: This value represents the lower end of the band to which the Unit Price value will apply. In the first line, this value is fixed at "1." In the second and subsequent lines, this value will be automatically set according to the Upper Qty setting in the previous line. Upper Qty: This value represents the upper end of the band to which the Unit Price value will apply. If no upper limit is desired for this band, leave this field blank. Unit Price: This value represents the price per print for this band. To input values in each of the fields, touch the desired field and then touch the button. An example setting is shown below. 37 Band Pricing