Sony UPCR20L Operating Instructions - Page 52
Cleaning the Ventilation Filter, To clean the paper feed roller
![]() |
View all Sony UPCR20L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Note After cleaning is finished, make sure that the cleaning sheet is completely ejected. If any part of the cleaning sheet remains, cut off all portions of the print paper on which the cleaning sheet is still affixed before further operation. 12Open the ribbon door, and remove the cleaning ribbon. To clean the paper feed roller If the paper feed rollers are dirty, gently wipe the rollers with a soft cloth moistened with alcohol while turning the rollers. Cleaning the Ventilation Filter A filter for the ventilation holes is located at the rear of the unit. Clean the filter about once every month regularly. If the filter is dirty, the time required for cooling the thermal head is lengthened and this causes the printing time to become longer. 1 Press upward on the top portion of the filter cover, and remove the filter cover. Note Be sure to turn off the POWER switch and disconnect the power cord before cleaning the paper feed roller. Paper feed roller 2 Remove the filter from the filter cover. The filter is held to the filter cover at four different points. 3 Wash the filter with water to remove the dust. Note Do not rub the netting of the filter roughly. 4 After the filter is completely dry, reattach it to the filter cover. Chapter 5 Maintenance 52 Cleaning
![](/manual_guide/products/sony-upcr20l-operating-instructions-1b5c8fc/52.png)