Sony UPCR20L Operating Instructions - Page 29
Setup, Displaying the Administration Screen, Displaying the, Administration Screen - price
View all Sony UPCR20L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 3 Setup Setup 3 Chapter Language and operation mode selections, prices, passwords and other settings for setting up the unit are configured from the administration screen. You can also change settings after setting up the unit and perform maintenance from the administration screen. Displaying the Administration Screen The password entry screen appears. 2 Enter the administrator password using the numeric keypad. 3 Touch the [OK] button. The administration screen appears. Proceed as follows to display the administration screen. Notes • Before you can make settings on the administration screen, you must enter the administrator password. In the factory default condition, the administrator password is set to "9999." • If a memory card is inserted in any of the front-side memory card slots of the unit, the administration screen does not come up. Remove any memory cards first, and then repeat the procedure. 1 At the Start Guide display, touch the top left corner of the screen twice in succession. By touching one of the tabs at the top of this screen, you can select the respective category to make settings. For details on each category, see this section and "Advanced Settings" on page 37. (Screens) tab Lets you select the language display and configure settings such as those for the screen saver. (System) tab Let's you select the operation mode, set the clock, and configure settings such as those for connecting the unit to a computer. You can also perform thermal head cleaning and touch panel adjustment from this tab. (Pricing) tab Lets you set the currency to use and the price of prints. 29 Displaying the Administration Screen