Sony VPL-CX76 Operating Instructions - Page 11

Presentation Tool (VPL-CX76 only) You can use a laser pointer or control a presentation file made using Microsoft PowerPoint when projecting a picture using the Air Shot feature. language of the operating system (OS) of your computer. To install the batteries Overview a Laser transmitter b LASER key A laser beam is emitted from the laser transmitter while you keep this key pressed. c SLIDE G/g key Used to change pages of the slide show in the forward/backward direction. d B key This key corresponds to the "B" key of a keyboard. When you press this key during the slide show, a black screen is displayed. To cancel the black screen, press this key again. Note A black screen may not be displayed even if you press the "B" key depending on the Open the cover (b) with a coin (a) and remove the battery case (c). Install the two size AAA (R03) batteries with the correct polarity. Notes on the laser beam • Do not look into the laser transmitter. • Do not aim the laser at people. Notes on Remote Commander/ Presentation tool operation • Make sure that nothing obstructs the infrared beam between the Remote Commander/Presentation tool and the remote control detector on the projector. Direct the Remote Commander/ Presentation tool toward the front or rear remote control detector. • The operation range is limited. The shorter the distance between the Remote Commander/Presentation tool and the projector is, the wider the angle within which the commander can control the projector becomes. Location and Function of Controls 11