Sony VPL-CX76 Operating Instructions - Page 29
The SET SETTING Menu
UPC - 027242666238
View all Sony VPL-CX76 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
The SET SETTING Menu The SET SETTING menu is used for changing the settings of the projector. SET SETTING Input-A Smar t APA: On Auto Input Search: Off Input-A Signal Sel.: Computer Input-B Select: Air Shot Color System: Auto Power Saving: Off IR Receiver: Front & Rear Illumination: On Panel Key Lock: Off Adjustments and Settings Using a Menu Setting items Functions Initial setting Smart APA The APA (Auto Pixel Alignment) automatically On adjusts "Dot Phase," "H Size" and "Shift" on the INPUT SETTING menu for the input signal from a computer. • On: When a signal is input from a computer, the APA functions automatically so that the picture can be seen clearly. Once the specified input signal has been adjusted by the "Smart APA," it will not be readjusted even when the cable is disconnected and connected again or the input channel is changed. You can adjust the picture by pressing the APA key on the Remote Commander even if "Smart APA" set to "On." • Off: The APA functions when you press the APA key on the Remote Commander. Auto Input Search When set to "On," the projector detects input signals in Off the following order: Input-A/Input-B (VPL-CX76 only) /Video/S-Video. It indicates the input channel when the power is turned on (only when "startup" in Memory Stick Home is set to "Off" (VPL-CX76 only)) or the INPUT key is pressed. Input-A Signal Sel. Selects the "Computer," "Component," or "Video GBR" signal input via the INPUT A connector. Computer Input-B Select Select "Air Shot" or "Memory Stick" as the input (VPL-CX76 only) source that you want to project via Input-B. Air Shot Color System Selects the color system of the input signal. If you select "Auto," the projector detects the color system of the input signal automatically. If the picture is distorted or colorless, select the color system according to the input signal. When the color system of the input signal is PAL60, select "PAL." If "Auto" is selected, the color system cannot be detected. Auto The SET SETTING Menu 29