Sony VPL-CX76 Operating Instructions - Page 47

Memory Preset signal No. 32 1280 × 960 33 34*1 1280 × 1024 35 36 37 38*2 43 480/60p 44 575/50p 45 1080/50i 47 720/60p 48 720/50p 50 540/60p 52 1400 × 1050 fH (kHz) fV (Hz) Sync SXGA VESA 60 Hz 60.000 SXGA VESA 75 Hz 75.000 SXGA VESA 43 Hz 46.433 SGI-5 53.316 SXGA VESA 60 Hz 63.974 SXGA VESA 75 Hz 79.976 SXGA VESA 85 Hz 91.146 480/60p (Progressive component 31.470 575/50p (Progressive component 31.250 1080/50i 28.130 720/60p 45.000 720/50p 37.500 540/60p 33.750 SXGA+ 60 Hz 63.981 60.000 75.000 86.872 50.062 60.013 75.025 85.024 60.000 50.000 50.000 60.000 50.000 60.000 60.020 H-pos, V-pos H-pos, V-pos H-pos, V-pos S on G H-pos, V-pos H-pos, V-pos H-pos, V-pos S on G/Y S on G/Y S on G/Y S on G/Y S on G/Y S on G/Y H-pos, V-pos SIZE 1800 1728 1696 1680 1696 1688 1476 1688 Notes • When a signal other than the preset signals shown above is input, the picture may not be displayed properly. • Memory No. 22*1 and 34*1 show the interlace signal. • For the Memory No. 38*2, the smart APA function and the APA key of the remote commander do not activate. Make adjustments for the input signals using the Adjust Signal... on the INPUT SETTING menu. • When an SXGA+ signal is input, the image may extend beyond the edges of the screen. In this case, input a signal with no black edges around the image, and disconnect and reconnect the cable or select the input signal by pressing the INPUT key. Others Specifications 47