TEAC AI-303 Owners Manual English Francais Espanol - Page 17
Checking the Bluetooth audio codec, Support for multipoint connection
View all TEAC AI-303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4 Start audio output on the other Bluetooth device. oo Confirm that the volume is turned up on the other Bluetooth device. If the volume of the audio being output is not turned up, no sound might be output from this unit. 5 Adjust the volume. oo The volumes of this unit and the other Bluetooth device are not linked. This unit cannot control the volume of the other Bluetooth device, and that device cannot control the volume of this unit. NOTE oo You cannot select the codec to be used by pressing a button, for example. oo Due to the characteristics of Bluetooth wireless technology, compared to the playback on the Bluetooth device, audio output through this unit will be slightly delayed. Checking the Bluetooth audio codec The audio codec being used for Bluetooth playback is shown by the green indicator. Support for multipoint connection Connecting with 2 Bluetooth devices at the same time is possible. Audio can only be output from one at a time when connected. Output from the device that most recently started playback will be prioritized. Playback will be stopped on the previously playing device. LDAC is an audio coding technology developed by Sony that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a Bluetooth connection. Unlike other Bluetooth compatible coding technologies such as SBC, it operates without any down-conversion of the Hi-Res Audio content*, and allows approximately three times more data** than those other technologies to be transmitted over a Bluetooth wireless network with unprecedented sound quality, by means of efficient coding and optimized packetization. * excluding DSD format contents ** in comparison with SBC (Subband Coding) when the bitrate of 990 kbps (96/48 kHz) or 909 kbps (88.2/44.1 kHz) is selected 17