TEAC GB-10 GB-10 owners manual - Page 40
Powering the unit, Using AA batteries, Using USB bus power
![]() |
View all TEAC GB-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3-Preparation Powering the unit This unit can be powered by two AA batteries, USB bus power or a TASCAM PS-P520 AC adaptor (sold separately). This unit can use either alkaline or nickel-metal hydride (NiMH) batteries. Using AA batteries As described in the "Inserting and removing SD cards" section above, this unit has a battery compartment in the bottom. Insert 2 AA batteries into this compartment, aligning them correctly with the plus/minus indications inside, and then close the compartment cover. When using AA batteries, set the type of battery in order to allow the unit to accurately show the amount of power remaining and determine whether enough power is available for proper operation. (See "Setting the battery type" on page 80.) CAUTION •• Manganese batteries cannot be used with this unit. •• This unit cannot recharge Ni-MH batteries. Use a commer- cially-available recharger. •• The included alkaline batteries are provided for confirming the operation of the unit and might not last very long. Using USB bus power Connect the unit with a computer using the included USB cable as shown in the illustration below. computer USB 40 TASCAM GB-10 The USB SELECT screen appears if the power is ON when you make the USB connection or if you turn the power ON after making the USB connection. This screen allows you to set
![](/manual_guide/products/teac-gb10-gb10-owners-manual-aac68d6/40.png)