TEAC GB-10 GB-10 owners manual - Page 77
-Using the tuner, Preparation
View all TEAC GB-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
13-Using the tuner This unit has a built-in tuner. By inputting the sound of an instrument, you can use the tuning meter on the display to tune that instrument accurately. In addition, you can output a tone for tuning from the /LINE OUT jack, which is onvenient for tuning multiple instruments simultaneously, for example. 3. The first item shown for each mode is "CALIB". Use this to set the frequency of A between 435 Hz and 445 Hz. Preparation 1. Press the TUNER button to open the TUNER screen. The setting value is shown on the right side of the screen. This setting is the same for both tuner modes. Use of each tuner mode is explained below. 2. The "MODE" item is shown. Use the [ª] button and Á button to select the tuner mode. The options are AUTO ( [ª] : chromatic tuner mode) and OSC. (Á : oscillator mode). After selecting the mode, press the TUNER button again to make settings for that mode. TASCAM GB-10 77