TP-Link 16dBi PharOSUN V1 User Guide - Page 31
Wireless Signal Quality, Radio Status, Client, Repeater Range Extender
View all TP-Link 16dBi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 4 Status Tab Distance Displays the wireless coverage distance where the client devices can be placed from the AP to get good wireless performance. You can change the value in Wireless Advanced Settings. Wireless Signal Quality Status of wireless signal quality displays the parameters of the received wireless signal in the modes of Client, Repeater (Range Extender), Bridge and AP Client Router. The parameters here is not applicable for other two modes. Signal Strength Displays the received wireless signal strength of the root AP. Noise Strength Displays the received environmental noise from wireless interference on the operating frequency. SNR Signal to Noise Ratio, the power ratio between the received wireless signal strength and the environmental noise strength. Generally, in order to achieve the best performance, users need to adjust the antenna to get the best SNR. Transmit CCQ Displays the wireless Client Connection Quality (CCQ). CCQ refers to the ratio of current effective transmission bandwidth and the theoretically maximum available bandwidth. CCQ reflects the actual link condition. Radio Status Radio status shows the MAC address, SSID, security mode and connected station number of the enabled AP. If the Client mode is enabled, the information of MAC address, security mode, WDS, root AP BSSID, root AP SSID, TX rate, RX rate and connection time of the client will also be displayed. - 28 -