TP-Link 16dBi PharOSUN V1 User Guide - Page 43
From HH:MM, Idle Time, Automatic, Time-based, Manual, Connect, Disable, Dynamic IP, Static IP
View all TP-Link 16dBi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 5 Network Tab attempt to access the Internet again. The default Idle Time is 15 minutes. If your Internet connection is expected to remain active all the time, enter 0 in the Idle Time field. Users those pay by time for their Internet access can choose this mode to save their Internet-access fee. NOTE: Sometimes the connection cannot be disconnected although you specify a time to Idle Time (0~99 minutes) because some applications visit the Internet continually in the background. Automatic - Connect automatically after the device is disconnected. Users those are charged a flat monthly fee can choose this mode. Time-based - You can configure the device to make it connect or disconnect based on time. Enter the start time in From (HH:MM) for connecting and end time in To (HH:MM) for disconnecting. Users those need to control the time period of Internet access can choose this mode. Manual - You can configure the device to make it connect or disconnect manually. After a specified period of inactivity (Idle Time), the device will disconnect your Internet connection, and you must click Connect manually to access the Internet again. If your Internet connection is expected to remain active all the times, enter 0 in the Idle Time field. Otherwise, enter the desired Idle Time in minutes you wish to use. Users those pay by time for their Internet access can choose this mode to save their Internet-access fee. Secondary Connection If your ISP provides an extra Connection type such as Dynamic/Static IP to connect to a local area network, you can activate this secondary connection. Disable - The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended. Dynamic IP - Use dynamic IP address to connect to the local area network provided by ISP. Static IP - Use static IP address to connect to the local area network provided by ISP. MTU Size The default MTU (Maximum Transmission Unit) size is 1480 bytes, which is usually appropriate. For some ISPs, you need modify the MTU. This should not be done unless your ISP told you to. Service Name/AC Name Do not change it unless your ISP told you to. - 40 -