TP-Link T2600G-28SQ T2600G Series Switches CLI Reference Guide Guide - Page 116

12.2 ddm shutdown Description The ddm shutdown command is used to configure whether to shut down the port when an exceeding alarm threshold or warning threshold event is encountered. Syntax ddm shutdown { none | warning | alarm } Parameter none -- The port will never be shut down regardless of the exceeding alarm threshold and warning threshold events. warning -- Shut down the port when an exceeding warning threshold event is encountered. alarm -- Shut down the port when an exceeding alarm threshold event is encountered. Default Setting none, which means the port will never be shut down regardless of the exceeding alarm threshold and warning threshold events. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet ) Example Shut down the port 1/0/25 when an exceeding warning threshold event is encountered: T2600G-28TS(config)#interface gigabitEthernet 1/0/25 T2600G-28TS(config-if)#ddm shutdown warning 12.3 ddm temperature_threshold Description The ddm temperature_threshold command is used to configure the threshold of the DDM temperature value. Syntax ddm temperature_threshold { high_alarm | high_warning | low_alarm | low_warning } value 93