TP-Link T2600G-28SQ T2600G Series Switches CLI Reference Guide Guide - Page 133

14.5 mac address-table notification Description The mac address-table notification command is used to configure global settings of MAC address table notification. Syntax mac address-table notification { [ global-status enable | disable ] [ table-full-status enable | disable ] [ interval time ] } Parameter global-status enable | disable -- Enable/Disable the notification function globally. table-full-status enable | disable -- Enable/Disable the MAC threshold notification. With this feature enabled, a SNMP notification is generated and sent to the network management system (NMS) when the threshold of the switch's MAC address table is reached or exceeded. interval time -- Specify the notification trap interval between each set of traps that are generated to the NMS. The interval ranges from 1 to 1000 seconds, and it's 1 second by default. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the global MAC address notification and table full notification, specify the notification sending interval as 2 seconds: T2600G-28TS(config)# mac address-table notification global-status enable table-full-status enable interval 2 14.6 mac address-table max-mac-count Description The mac address-table max-mac-count command is used to configure the Port Security. To return to the default configurations, please use no mac address-table max-mac-count command. Port Security is to protect the 110