TP-Link T2600G-28SQ T2600G Series Switches CLI Reference Guide Guide - Page 533

Syntax power profile name [supply {enable | disable} [priority {low | middle | high} [consumption { power-limit | auto | class1 | class2 | class3 | class4 } ] ] ] no power profile name Parameter name -- The PoE profile name, ranging from 1 to 16 characters. If the name being assigned contains spaces then put it inside double quotes. supply -- The PoE status of the port in the profile. By default, the PoE status is "enable". priority -- The PoE priority of the port in the profile. The priority levels include "high", "middle" and "low" in descending order. When the supply power exceeds the system power limit, the PD linked to the port with lower priority will be disconnected. By default, the PoE priority is "low". consumption -- The max power the port in the profile can supply, with five options: "power-limit", "auto", "class1", "class2", "class3" and "class4". "Power-limit" indicates you can manually enter a value ranging from 1 to 300. The value is in the unit of 0.1 watt. For instance, if you want to configure the max power as 5w, you should enter 50. "Auto" indicates the value is assigned automatically by the PoE switch. "Class1" represents 4w. "Class2" represents 7w. "Class3" represents 15.4w. "Class4" represents 30w. Command Mode Global Configuration Mode Privilege Requirement None. Example Create a PoE profile named "IP Camera" whose PoE status is "enable", PoE priority is "low" and the power limit is "5w": T2600G-28MPS(config)# power profile "IP Camera" supply enable priority low consumption 50 59.3 power inline consumption (interface) Description The power inline consumption command is used to configure the power limit the corresponding port can supply. 510