TP-Link T2600G-28SQ T2600G Series Switches CLI Reference Guide Guide - Page 428

Description The access-list packet-content profile command is used to specify the offset of each chunk. There are four chunks to be configured. They must be configured before you configure the chunk value&mask. Syntax access-list packet-content profile chunk-offset0 offset0 chunk-offset1 offset1 chunk-offset2 offset2 chunk-offset3 offset3 Parameter offset0 -offset3: Specify the offset of each chunk. The value ranges from 0 to 31. When the offset is set as 31, it matches the first 127,128, 1, 2 bytes of the packet; when the offset is set as 0, it matches the 3, 4, 5, 6 bytes, and so on, for the rest of the offset value. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure a packet content profile with offset 0,1,2,3: T2600-28TS(config)# access-list packet-content profile chunk-offset0 0 chunk-offset1 1 chunk-offset2 2 chunk-offset3 3 47.3 access-list resequence Description The access-list resequence command is used to resequence the rules by providing a Start Rule ID and Step value. Syntax access-list resequence acl-id-or-name start start-rule-id step rule-id-step-value Parameter acl-id-or-name -- The ACL ID or name. start-rule-id -- The start rule ID. rule-id-step-value -- The step value. 405