TP-Link T2600G-28SQ T2600G Series Switches CLI Reference Guide Guide - Page 429

Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Resequence the rules of ACL 12 with the start ID as 1 and step value as 5: T2600G-28TS(config)# access-list resequence 12 1 step 5 47.4 access-list mac Description The access-list mac command is used to create MAC ACL. To delete the MAC ACL, please use no access-list mac. Syntax access-list mac acl-id-or-name rule { auto | rule-id } { deny | permit } logging {enable | disable} [smac source-mac smask source-mac-mask ] [dmac destination-mac dmask destinationmac-mask ] [type ether-type] [pri dot1p-priority] [vid vlan-id] [tseg time-range-name] no access-list mac acl-id-or-name rule rule-id Parameter acl-id-or-name -- Enter the ID or name of the ACL that you want to add a rule for. auto -- The rule ID will be assigned automatically and the interval between rule IDs is 5. rule-id -- Assign an ID to the rule. deny | permit -- Specify the action to be taken with the packets that match the rule. By default, it is set to permit. The packets will be discarded if "deny" is selected and forwarded if "permit" is selected. enable | disable -- Enable or disable Logging function for the ACL rule. If "enable " is selected, the times that the rule is matched will be logged every 5 minutes. With ACL Counter trap enabled, a related trap will be generated if the matching times changes. source-mac -- Enter the source MAC address. The format is FF:FF:FF:FF:FF:FF. 406