TP-Link T2600G-28SQ T2600G Series Switches CLI Reference Guide Guide - Page 445

Charpter 48. IPv4 IMPB Commands You can bind the IP address, MAC address, VLAN and the connected Port number of the Host together, which can be the condition for the ARP Inspection and IP verify source to filter the packets. 48.1 ip source binding Description The ip source binding command is used to bind the IP address, MAC address, VLAN ID and the Port number together manually. You can manually bind the IP address, MAC address, VLAN ID and the Port number together in the condition that you have got the related information of the Hosts in the LAN. To delete the IP-MAC-VID-PORT entry from the binding table, please use no ip source binding index command. Syntax ip source binding hostname ip-addr mac-addr vlan vlan-id interface { fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port | port-channel port-channel-id } { none | arp-detection | ip-verify-source | both } no ip source binding index ip-addr Parameter hostname --The Host Name, which contains 20 characters at most. ip-addr -- The IP address of the Host. mac-addr -- The MAC address of the Host. vlan-id --The VLAN ID needed to be bound, ranging from 1 to 4094. port -- The number of port connected to the Host. none | arp-detection | ip-verify-source | both --The protect type for the entry. "arp-detection" indicates ARP detection; "ip-verify-source" indicates IP source filter; "none" indicates applying none; "both" indicates applying both. ip-addr -- The IP address of the entry to be deleted. Command Mode Global Configuration Mode 422