TP-Link T2600G-28SQ T2600G Series Switches CLI Reference Guide Guide - Page 404

Parameter 0 -- Specify the encryption type. 0 indicates that an unencrypted password will follow. By default, the encryption type is 0. password -- A string with 31 characters at most, which can contain only English letters (case-sensitive), digits and 17 kinds of special characters. The special characters are By default, it is empty. By default, it is empty. 7 -- Indicates a symmetric encrypted password with fixed length will follow. encrypted-password -- A symmetric encrypted password with fixed length, which you can copy from another switch's configuration file. After the encrypted password is configured, you should use the corresponding unencrypted password if you re-enter this mode. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. User Guidelines If the password you configured here is unencrypted and the global encryption function is enabled in service password-encryption, the password in the configuration file will be displayed in the symmetric encrypted form. If both the enable admin password and enable admin secret are defined, only the latest configured password will take effect. Example Set the Enable password as "abc123" and unencrypted for users to change the access level to admin: T2600G-28TS(config)#enable admin password 0 abc123 43.27 enable admin secret Description The enable admin secret command is used to set or change the Enable password for users to change the access level to admin. To remove the Enable password, please use no enable admin command. This command uses the MD5 encryption. 381