TP-Link T2600G-28SQ T2600G Series Switches CLI Reference Guide Guide - Page 400

Example Configure the enable authentication method list on the telnet terminal line as "list2": T2600G-28TS(config)#line telnet T2600G-28TS(config-line)# enable authentication list2 43.21 enable authentication (ssh) Description The enable authentication command is used to apply the privilege authentication method list to the ssh terminal line. To restore to the default authentication method list, please use the no enable authentication command. Syntax enable authentication { method-list } no enable authentication Parameter method-list -- Specify the enable method list on the ssh terminal line. It is "default" by default, which contains the method "none". Command Mode Line Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the enable authentication method list on the ssh terminal line as "list2": T2600G-28TS(config)# line ssh T2600G-28TS(config-line)# enable authentication list2 377