TP-Link TL-WPA8631P KIT TL-WPA8631P KITUS V3 User Guide - Page 35

Upgrade the Firmware, 3. 11. 4. Backup and Restore Configuration Settings

Get TP-Link TL-WPA8631P KIT PDF manuals and user guides View all TP-Link TL-WPA8631P KIT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Chapter 3 Configuring via Web Management Interface 3. Select the correct End date and time when daylight saving time ends at your local time zone. 4. Click Save. 3. 11. 3. Upgrade the Firmware TP-Link is dedicated to improving and richening the product features, giving you a better network experience. We will release the latest firmware at TP-Link official website, you can download the latest firmware file from our website: www.tp-link.com and upgrade the firmware to the latest version. 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. 2. Go to System Tools > Firmware Upgrade page and confirm the Hardware Version. 3. Go to www.tp-link.com. Download the latest firmware file for the extender. Note: The upgraded firmware version must correspond to the hardware. 4. Click Browse to locate the downloaded new firmware file, and click Upgrade. 5. Wait a few minutes for the upgrading and rebooting. Note: 1. Before upgrading the firmware, it's better to back up your current settings. 2. During the upgrading process, do not turn off or reset the extender. 3. 11. 4. Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the extender. You can back up the configuration file to your computer for future use and restore the extender to a previous settings from the backup file when needed. Moreover, if needed, you can erase the current settings and reset the extender to the default factory settings. • To back up configuration settings: 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the password you set for the extender. 2. Go to System Tools > Backup & Restore page. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
32
Chapter 3
Configuring via Web Management Interface
3. Select the correct
End
date and time when daylight saving time ends at your local
time zone.
4. Click
Save
.
3° 11° 3°
Upgrade the Firmware
TP-Link is dedicated to improving and richening the product features, giving you a better
network experience. We will release the latest firmware at TP-Link official website, you
can download the latest firmware file from our website:
www.tp-link.com
and upgrade
the firmware to the latest version.
1. Connect to the powerline extender wirelessly. Visit
http://tplinkplc.net
, and log in with
the username and password you set for the extender.
2. Go to
System Tools
>
Firmware Upgrade
page and confirm the
Hardware Version
.
3. Go to
www.tp-link.com
. Download the latest firmware file for the extender.
Note:
The upgraded firmware version must correspond to the hardware.
4. Click
Browse
to locate the downloaded new firmware file, and click
Upgrade
.
5. Wait a few minutes for the upgrading and rebooting.
Note:
1.
Before upgrading the firmware, it’s better to back up your current settings.
2.
During the upgrading process, do not turn off or reset the extender.
3° 11° 4°
Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the extender. You can
back up the configuration file to your computer for future use and restore the extender
to a previous settings from the backup file when needed. Moreover, if needed, you can
erase the current settings and reset the extender to the default factory settings.
•
To back up configuration settings:
1. Connect to the powerline extender wirelessly. Visit
http://tplinkplc.net
, and log in with
the password you set for the extender.
2. Go to
System Tools
>
Backup & Restore
page.