TRENDnet TEW-821DAP User's Guide - Page 14

TRENDnet User's Guide Note: It is recommended to use 128-bit format because it is more secure to use a key that consists of more characters.  HEX or ASCII: Select which WEP code type to assign Selecting WPA- Personal, WPA2- Personal, WPA2- Personal, or Mixed (WPA2-PSK recommended): In the Security Mode drop-down list, select WPA- Personal TEW-821DAP Selecting WPA-Enterprise, WPA2-Enterprise, or WPA2-Enterprise Mixed: The following section outlines options when selecting WPA-Personal, WPA2- Personal, or WPA2- Personal Mixed (Preshared Key Protocol),  WPA Cipher: Select a Cipher Type to use. When selecting WPA-PSK security, it is recommended to use TKIP + AES. o When selecting WPA2- Personal Mixed security, it is recommended to use TKIP+AES. o When selecting WPA2- Personal security, it is recommended to use AES.  Pre-Shared Key: Enter the passphrase or password o This is the password or key that is used to connect your computer to this router wirelessly Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)  Key Update Interval: Enter the time interval (seconds) of when the network passphrase will rotate. Note: It is recommended to use the default interval time. Your passphrase will not change, rotation of the key is part of the WPA protocol and designed to increase security. The following section outlines options when selecting WPA-Enterprise. WPA2Enterprise or WPA2-Enterprise Mixed known as EAP (Extensible Authentication Protocol). Also known as called Remote Authentication Dial-In User Service or RADIUS. Note: This security type requires an external RADIUS server, PSK only requires you to create a passphrase.  WPA Cipher: Select a Cipher Type to use. When selecting WPA-PSK security, it is recommended to use TKIP + AES.  Key Update Interval: Enter the time interval (seconds) of when the network passphrase will rotate. Note: It is recommended to use the default interval time. Your passphrase will not change, rotation of the key is part of the WPA protocol and designed to increase security.  IP Address: Enter the IP address of the RADIUS server. (e.g. 192.168.10.250)  Port: Enter the port your RADIUS server is configured to use for RADIUS authentication. Note: It is recommended to use port 1812 which is typical default RADIUS port.  Shared Secret: Enter the shared secret used to authorize your router with your RADIUS server. © Copyright 2015 TRENDnet. All Rights Reserved. 14