TRENDnet TPE-1020WS User's Guide - Page 31
View your trunk group status information, Con your port priority, System Priority
View all TRENDnet TPE-1020WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TRENDnet User's Guide View your trunk group status information Bridge > Trunk Config > LACP Group Status 1. Log into your switch management page (see "Access your switch management page" on page 11). 2. Click on Bridge, click on Trunk Config, and click on LACP Group Status. 3. View your trunk group status information. • System Priority - Preassigned setting that cannot be modified. This value applies to the switch. • System ID - MAC address value assigned to the individual switch. This value cannot be modified. • Group: # The ID number of the trunk (link aggregation group). TPE-1020WS Configure your port priority Bridge > Trunk Config > Port Priority 1. Log into your switch management page (see "Access your switch management page" on page 11). 2. Click on Bridge, click on Trunk Config, and click on Port Priority. 3. Review the settings. Click Apply to save changes. To assign a port higher priority within a trunk group, find the port number and in the priority column, enter a priority value 0-65535 (65535 being the highest priority). 4. Click Save Settings to Flash (menu). 5. Click Save Settings to Flash (button), then click OK. Note: This step saves all configuration changes to the NV-RAM to ensure that if the switch is rebooted or power cycled, the configuration changes will still be applied. © Copyright 2013 TRENDnet. All Rights Reserved. 31