TRENDnet TPE-1020WS User's Guide - Page 49
Con the IPv6 Traffic Class Priority Settings, IPv6 Traffic Class Global Settings
View all TRENDnet TPE-1020WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
TRENDnet User's Guide Configure the IPv6 Traffic Class Priority Settings Bridge > QoS > IPv6 Traffic Class Priority Settings 1. Log into your switch management page (see "Access your switch management page" on page 11). 2. Click on Bridge, click on QoS and click on IPv6 Traffic Class Priority Settings. 3. Review the settings. • IPv6 Traffic Class Global Settings: Select Enable or Disable. Click Apply to save the settings. • IPv6 Traffic Class (0-255): Specify the value of IPv6 class. • Class ID: Defines the priority assigned to the port. The priorities are Highest, High, Medium and Low. Click Add to add the traffic class setting entry to the table. TPE-1020WS In the list, you can click Modify to modify an entry or click Delete or delete the entry. You can also click Delete All to delete all of the entries in the table. If the entries span multiple pages, you can navigate page number in the Page field and click Go or you can click First, Previous, Next, and Last Page to navigate the pages. 4. Click Save Settings to Flash (menu). 5. Click Save Settings to Flash (button), then click OK. Note: This step saves all configuration changes to the NV-RAM to ensure that if the switch is rebooted or power cycled, the configuration changes will still be applied. © Copyright 2013 TRENDnet. All Rights Reserved. 49