Thermador CET366YB Instructions for Use - Page 15
Kitchen timer, Panel lock, Wipe protection, Basic settings
View all Thermador CET366YB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Operation en-us 5.7 Kitchen timer You can use the Kitchen timer to set a time of up to 99 minutes. The Kitchen timer is independent from other settings and does not switch off a cooking zone. You can also use the Kitchen timer when the cooktop is turned off or the panel lock is activated. Setting the Kitchen timer WARNING Boilovers can cause smoke and some foods and oils may catch fire if left on high temperature settings. ▶ When using a timer, always supervise the cooktop. ▶ Do not allow anything to boil over or burn. 1. Press TIMER. a and light up on the timer display. 2. Set the desired time in the settings area. a The time starts to count down. a When the time has elapsed, a beep sounds. a and blink in the timer display. 3. Press TIMER to stop the signals. After 10 seconds the signals stop automatically. Changing or canceling the kitchen timer 1. Press TIMER. 2. Set the desired time in the settings area. To cancel the kitchen timer, set the time to . 5.8 Panel lock You can use the panel lock to prevent the cooktop from being turned on accidentally. CAUTION The panel lock may be turned on and off accidentally due to: ▶ water spilled during cleaning ▶ food that has overflowed ▶ objects being placed on the panel lock touch key. Activating the panel lock Requirement: The cooktop is turned off. ▶ Touch LOCK for 4 seconds. a The indicator over LOCK lights up for 10 seconds. a The control panel is locked. Deactivating the panel lock ▶ Touch LOCK for 4 seconds. a The control panel is unlocked. Automatic panel lock This function automatically activates the panel lock when you switch off the cooktop. The automatic panel lock can be activated in the basic settings → Page 15. 5.9 Wipe protection With this function you can avoid changing the settings while cleaning the control panel during cooking. This function does not lock the main switch. You can turn the cooktop off at any time. Activating wipe protection ▶ Touch LOCK. a The indicator above LOCK lights up. a The control panel is locked for 35 seconds. a After 30 seconds a beep indicates that the wipe protec- tion is about to turn off. Deactivating wipe protection You can turn off the wipe protection manually. ▶ Touch LOCK. a The indicator above LOCK goes out. 5.10 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings overview Here you can find an overview of the basic settings and the preset factory settings. Display Function Panel lock - Manual1 - Automatic - Function deactivated Signal tones - Confirmation signal and error signal are off. The main switch signal remains on. - Only error signal is on. - Only confirmation signal is on. - Confirmation signal and error signal are on1. Duration of timer end signal - 10 seconds1 - 30 seconds - 1 minute Automatically activating cooking zone extensions when a cooking zone is selected. - Off - On1 - Last selected setting before turning off the cooking zone. Time for setting a cooking zone after selection - Unlimited: The last selected cooking zone remains selected. You can adjust the settings without having to select it again1. - Limited: You can adjust the settings for the selected cooking zone within 10 seconds. After 10 seconds you have to select the cooking zone again. Restore factory settings - Off1 - Restore appliance to factory settings 1 Factory setting 15