Toshiba Tecra M2-S519 Maintenance Manual - Page 120

3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 3. Select the option you want to execute and press Enter. When "1-SYSTEM TEST" is selected, the following message will appear: SYSTEM TEST XXXXXXX XXXX DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PASS COUNT: XXXXX WRITE DATA: XX ADDRESS : XXXXXX ERROR COUNT: XXXXX READ DATA : XX TATUS : XXX SUB-TEST MENU : 01 - ROM checksum 02 - Dock/UnDock 03 04 - Fan ON/OFF 05 - Gerserville 06 - Quick charge 07 - DMI read 08 - DMI write 09 - CPU Thirmistor 10 - 11 - System LED 99 - Exit to DIAGNOSTIC TEST MENU NOTE: The menu displayed by your computer may be slightly different from the one shown above. 4. Select the desired subtest number from the subtest menu and press Enter. The following message will appear: TEST LOOP : YES/NO Selecting YES increases the pass counter by one, each time the test cycle ends and restarts the test cycle. Selecting NO returns the subtest menu to the main menu after the test is complete. 3-6 TECRA M2 Maintenance Manual (960-468)