Toshiba Tecra M2-S519 Maintenance Manual - Page 254

4 Replacement Procedures 4.13 Wireless LAN board 4.13 Wireless LAN board Removing the Wireless LAN board To remove the wireless LAN board, make sure the computer is in boot mode and powered off, follow the steps below and refer to figures 4-25. NOTE: The wireless LAN board is an option in some models. This computer supports four types of wireless LAN board (802.11/b, 802.11a/b, 802.11b/g or 802.11a/b/g combo). CAUTION: Do not try to remove the wireless LAN board with the computer turned on. The computer or the wireless LAN board can be damaged. Do not touch the connectors on the wireless LAN board module on the computer. Debris on the connectors may cause wireless LAN board access problems. 1. Disconnect the wireless LAN antenna cables (black and white) from the wireless LAN board using an antenna coaxial cable disconnector. Wireless LAN antenna cable (black) Latch Wireless LAN board Wireless LAN antenna cable (white) Latch Figure 4-25 Removing the wireless LAN board 4-40 TECRA M2 Maintenance Manual (960-468)