Toshiba Tecra M2-S519 Maintenance Manual - Page 175

3.22 Error Code and Error Status Names 3 Tests and Diagnostics 3.22 Error Code and Error Status Names Table 3-5 lists the error codes and error status names for the Diagnostic Test. Table 3-5 Error codes and error status names (1/3) Device name (Common) System Memory Keyboard Display FDD Error code FF 01 03 04 05 06 07 08 09 10 01 02 DD FE FD F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA EF ED EE 01 02 03 04 06 08 09 10 20 40 60 80 EE Error status name Data Compare Error ROM Checksum Error ROM Serial ID Write Error ROM Not Supported PS-System ROM Sensing Error (AC-adapter) ROM Sensing Error (1st Battery) ROM Sensing Error (2nd Battery) ROM Thormistor Error (1) ROM Thormistor Error (2) ROM Thormistor Error (3) RAM Parity Error RAM Protected Mode Not Changed RAM Cache Memory Error USB Get Descr.Error (First) USB Set Address Error HUB Get Descr.Error (Top 8B) HUB Get Descr.Error (Whole) HUB Set Configuration Error HUB Get Descr.Error (Descr.) HUB Set Feature Error (P ON) HUB Get Status Error HUB Set Feature Error (Reset) HUB Clear Feature Error HUB Clear Feature1 Error HUB Set Feature Error (Enab.) HUB Clear Feature2 Error USB Over Current Error USB Get Descr.Error (Second) VRAM Size Not Support FDD Bad Command Error FDD Address Mark Not Found FDD Write Protected FDD Record Not Found FDD Media Removed FDD DMA Overrun Error FDD DMA Boundary Error FDD CRC Error FDD FDC Error FDD Seek Error FDD Not Drive Error FDD Time Out Error FDD Write Buffer Error TECRA M2 Maintenance Manual (960-468) 3-61