Toshiba Tecra M2-S519 Maintenance Manual - Page 292
LCD cable, copper tape, LCD unit, screws, mask seals, FL cable, HV cable, FL inverter, insulator,
View all Toshiba Tecra M2-S519 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
4 Replacement Procedures 4.24 LCD unit/FL inverter 4. Connect the LCD cable to the connector on the back of the LCD unit. Stick the copper tape on the LCD cable. CAUTION: 5. Seat the LCD unit and secure it with the following screws. • M2×4Z S-FLAT HEAD screw ×4 6. Stick the four mask seals on the sides of the LCD unit. 7. Connect the FL cable and the HV cable to the FL inverter. 8. Seat the FL inverter and stick the insulator on the FL inverter of the FL cable side. 9. Secure the FL inverter with the following screw. • M2×4Z S-FLAT HEAD screw ×1 10. Install the LCD mask while hooking the latches. 11. Secure the LCD mask with the following screws. • M2.5×6B FLAT HEAD screw ×2 12. Stick the two mask seals. 4-78 TECRA M2 Maintenance Manual (960-468)