Toshiba Tecra M2-S519 Maintenance Manual - Page 79

2.4 System Board Troubleshooting 2 Troubleshooting Procedures Table 2-5 Printer port LED boot mode status (6/7) LED Status (0Ah) Test item PCI automatic configuration 0Bh Running a task waiting the end of PCI_CONFIGURATION Initialization of H/W that is necessary after PCI configuration Enabling power off Creating output code 0Ch FIRST_64KB_CHECK 0Dh INIT_INT_VECTOR 0Eh INIT_DNP 0Fh INIT_SYSTEM 11h Display initialize pre post 12h INIT_DISPLAY 13h DISP_LOGO 14h SYS_MEM_CHECK 15h EXT_MEM_CHECK 16h EXT_MEM_CHECK 17h INIT_SYS_MEM 18h CHK_DMA_PAGE 19h CHECK_DMAC 1Ah INIT_DMAC 1Bh CHECK_PRT 1Ch CHECK_SIO 1Dh BOOT_PASSWORD 1Eh EX_IO_ROM_CHECK Message Creating a work area for auto configuration Configuration Storing the results of VGA configuration (Check memory of first 64KB) (Vector initialization) (NDP initialization) Storing CMOS error status in IRT_ERR_STS_BUF Start of TIMER initialization Initialization of EC and Reading battery information Update of system BIOS (model name, EDID of the LCD) Setting of DRAM window from memory size SMI Permission of Dock Port Multi box (Far Call emulation) (VGA chip, Waiting for the end of initialization, initialization of VGA BIOS) (LOGO display) (Conventional memory check) (Boot) (Check of exceptional cases in protected mode) (Boot) (Occurrence of exceptional case) (Conventional memory initialization) (Reboot) (Boot) (Boot) (Boot) (Password check) (Waiting for the end of INIT_KBC division process) (Option I/O ROM check) TECRA M2 Maintenance Manual (960-468) 2-25