Toshiba Tecra M2-S519 Maintenance Manual - Page 182

3 Tests and Diagnostics 3.25 Log Utilities 3.25.2 Operations Selecting 5 and pressing Enter in the DIAGNOSTIC MENU, logs error information into RAM or onto a floppy disk. The error information is displayed in the following format: XXXXX ERRORS CNT TS-No PASS STS ADDR WD RD HSTS [ERROR STATUS NAME] 001 EXP01 0000 XXX 00000000 00 00 0000 FDD-WRITE PROTECTED 001 EXP03 0000 XXX 00000000 00 00 0000 FDD-TIME OUT ERROR Address Error status HDC status Pass count Subtest number Read data Write data Error status name Test name Error count [[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]] 1. The error information displayed on the screen can be manipulated by the following number keys: 1 scrolls the display to the next page. 2 scrolls the display to the previous page. 3 returns to the Diagnostic Menu. 4 erases all error log information in RAM. 5 outputs the error log information to a printer. 6 reads the log information from a floppy disk. 7 writes the log information to a floppy disk. 2. In the case of "error retry OK", a capital "R" will be placed at the beginning of the error status. However, it is not added to the error count. 3-68 TECRA M2 Maintenance Manual (960-468)