Toshiba e750 User Manual - Page 110

Getting Connected To create an Ethernet connection to an ISP: 1. You do not need to create a new connection on your device. Instead, you must purchase and configure an Ethernet card that is compatible with your device. 2. Obtain the following information from your ISP: user name, password, and domain name. 3. Insert the Ethernet card into your device. For instructions on inserting and using the Ethernet card, see the owner's manual for the card. 4. The first time you insert the card, Network Settings will appear automatically so that you can configure the network card. If it does not appear, or to change settings later, tap > Settings > Connections tab > Connections > Advanced tab > Network Card. 5. If you need to enter specific server information, tap the appropriate adapter. Most networks use DHCP, so you should not have to change these settings unless your network administrator instructs you to do so. 6. If necessary, connect the network card to the network by using a network cable. For information, see the documentation that came with your network card. To start a connection, insert the network card, and begin using a desired program. For example, switch to Pocket Internet Explorer and browse to a Web page. Your device will automatically begin connecting. Connect to Work If you have access to a network at work, you can send e-mail messages, view intranet pages, synchronize your device, and possibly access the Internet. You can connect to work in one of two ways: Create a modem connection by using a RAS account. Before you can create this modem connection, your network administrator will need to set up a RAS account for you. If this is the method you want to use, see "To create a modem connection to a network." Your network administrator may also give you VPN settings. Use an Ethernet card and a net tap to connect to the network. If this is the method you want to use, see "To create an Ethernet connection to a network." To create a modem connection to a network: 1. Get the following information from your network administrator: dial-up access telephone number, user name, password, domain name, and TCP/IP settings. 2. If your device does not have a built-in modem, install a modem card. 3. Tap > Settings > Connections and then tap Connections. 4. In My Work Network, tap Add a new modem connection, and follow the instructions in the New Connection wizard. 5. Enter a name for the connection, such as your company's name. User's Manual 7-4