Turtle Beach Montego DDL User's Guide - Page 7

Connectors - sound card

Page 7 highlights

WWW.TURTLEBEACH.COM CONNECTORS Connector Front Out (Channels 1 & 2) Function Stereo, 4, 6 and 8 channel speaker configurations are selected from the Montego Control Panel Speakers Tab. Use Front Out for stereo playback on powered speakers or headphones. Surround Out (Channels 3 & 4) Use Surround Out for rear channel powered speakers in 4, 5.1 and 7.1 channel analog playback modes. Center/LFE(Chan Use Center/LFE Out for powered center and sub-woofer speakers in 5.1 or 7.1 nels 5 & 6) playback modes. Rear Out (Channels 7 & 8) S/PDIF Digital In S/PDIF Digital Out Microphone Input (Monaural) Line-In L/R CD L/R In (Stereo) Aux L/R In (Stereo) Use Rear Out for powered speakers placed directly behind the listener in 7.1 playback mode. Optical S/PDIF input for recording digital audio from external sources. Settings are in the Speakers Tab. Optical S/PDIF output for playback of digital audio. Allows for pass-through of Dolby Digital and DTS multi-channel DVD sound to external A/V receivers or digital speaker systems. Accepts condenser or dynamic microphones. To activate an additional 20dB boost on the mic gain, access the Mixer tab in the Control Panel. Press the "..." button under the Mic volume slider and check the "Microphone Boost" option. Accepts line-level sources, such as CD players, cassette players, etc.. Accepts analog audio from an internal CD drive. Windows XP utilizes digital audio transfer to the sound card from the PCI bus, so this connection is not required. Pin 1 - Left (white) Pin 2 - Ground (black) Pin 3 - Ground (black) Pin 4 - Right (red) Accepts internal analog audio from a second CD or DVD (not available in Vista/Windows 7). Pin 1 - Left (white) Pin 2 - Ground (black) Pin 3 - Ground (black) Pin 4 - Right (red) Montego DDL 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

WWW
.T
URTLE
B
EACH
.
COM
Montego DDL
7
C
ONNECTORS
Connector
Function
Front Out
(Channels 1 & 2)
Surround Out
(Channels 3 & 4)
Center/LFE(Chan
nels 5 & 6)
Rear Out
(Channels 7 & 8)
Stereo, 4, 6 and 8 channel speaker configurations are selected from the
Montego Control Panel Speakers Tab.
Use
Front Out
for stereo playback on powered speakers or headphones.
Use
Surround Out
for rear channel powered speakers in 4, 5.1 and 7.1 channel
analog playback modes.
Use
Center/LFE Out
for powered center and sub-woofer speakers in 5.1 or 7.1
playback modes.
Use
Rear Out
for powered speakers placed directly behind the listener in 7.1
playback mode.
S/PDIF Digital In
Optical S/PDIF input for recording digital audio from external sources. Settings are
in the Speakers Tab.
S/PDIF Digital Out
Optical S/PDIF output for playback of digital audio. Allows for pass-through of
Dolby
Digital and DTS
multi-channel DVD sound to external A/V receivers or
digital speaker systems.
Microphone Input
(Monaural)
Accepts condenser or dynamic microphones. To activate an additional 20dB boost
on the mic gain, access the
Mixer
tab in the Control Panel.
Press the “…” button
under the Mic volume slider and check the
Microphone Boost
” option.
Line-In L/R
Accepts line-level sources, such as CD players, cassette players, etc..
CD L/R In (Stereo)
Accepts analog audio from an internal CD drive. Windows XP utilizes digital audio
transfer to the sound card from the PCI bus, so this connection is not required.
Pin 1 - Left (white)
Pin 2 - Ground (black)
Pin 3 - Ground (black)
Pin 4 - Right (red)
Aux L/R In
(Stereo)
Accepts internal analog audio from a second CD or DVD (not available in
Vista/Windows 7).
Pin 1 - Left (white)
Pin 2 - Ground (black)
Pin 3 - Ground (black)
Pin 4 - Right (red)