Xerox 6505/N User Guide - Page 150
PCL Settings, Description
View all Xerox 6505/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Control Panel Menus PCL Settings Use this menu to configure settings for PCL. Item Paper Tray Paper Size Orientation 2-Sided Font Symbol Set Font Size Font Pitch Form Line Quantity Image Enhance Hex Dump Draft Mode Line Termination Default Color Description Specifies the paper tray used. Specifies the default paper size. Specifies the paper printing direction: Portrait or Landscape. The default setting is Portrait. Specifies 2-sided printing options: • 2-Sided Print: On or Off. The default setting is On when the duplex unit is installed. • Binding Edge: Flip Long Edge or Flip Short Edge Specifies the default font. The default setting is Courier. Specifies the font used for symbols. The default setting is ROMAN-8. Specifies the default font size, from 4 through 50, in increments of 0.25. Available only for typographic fonts. Specifies the character spacing. You can specify a value from 6.00 through 24.00 in increments of 0.01. The default setting is 10.00. Specifies the form line (the number of lines per form). You can specify a value from 5 through 128 in increments of 1. The default setting is 64. Specifies the copies to print. You can specify a value from 1 through 999. The default setting is 1. Specifies whether to perform image enhancement. Image enhancement is a feature that makes the boundary line between black and white smoother, to decrease jags and enhance the appearance. The default setting is On. Specifies whether to print the data sent from a computer in the ASCII code corresponding to the hexadecimal notation format to check the data contents. The default setting is Disable. Specifies whether to print in draft mode. The default setting is Disable. Specifies line termination. • Off: Line termination commands are not added. • Add-LF: The Line Feed command is added. • Add-CR: The Carriage Return command is added. • CR-XX: The Line Feed and Carriage Return commands are both added. Specifies the default color mode: Black or Color. The default setting is Black. 150 WorkCentre 6505 Color Laser Multifunction Printer User Guide