Xerox 750DX 5750 Error Codes List - Page 10

Place a service call.

Page 10 highlights

Status Code 05-110 Description/Direction The control logic sensed a timing problem with the ADF Registration On Jam Check. Initial action: Check the paper path for pieces of ripped paper or other foreign objects. Check the following for contamination, excessive wear or damage: · Nudger Roll (REP 5.22) · Feed Roll (REP 5.22) · Mylar guards on the underside of the ADF Feed Cover · Retard Rolls (REP 5.24) · Nudger Chute Open and close the ADF left cover. Check for binding or other mechanical problems with the left cover. Observe the UI and make sure the customer message to close the left cover appears in a timely fashion. Verify that the jams are not being caused by operator error. Possible operator errors include: · Using originals of the wrong type. Recommended originals are described in the User Guide. · Document Guide adjusted incorrectly. · Trying to copy more than 30 originals at a time. If the problem still exists: Place a service call. Fault Code Procedures 5/98 2-10 5750 DocuCare Service Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

5/98
Fault Code Procedures
2-10
5750 DocuCare Service Manual
05-110
The control logic sensed a timing problem with the ADF Registration On Jam Check.
Initial action:
Check the paper path for pieces of ripped paper or other foreign objects.
Check the following for contamination, excessive wear or damage:
· Nudger Roll (REP 5.22)
· Feed Roll
(REP 5.22)
· Mylar guards on the underside of the ADF Feed Cover
· Retard Rolls
(REP 5.24)
· Nudger Chute
Open and close the ADF left cover. Check for binding or other mechanical problems with the left cover.
Observe the UI and make sure the customer message to close the left cover appears in a timely fashion.
Verify that the jams are not being caused by operator error. Possible operator errors include:
· Using originals of the wrong type. Recommended originals are described in the User Guide.
· Document Guide adjusted incorrectly.
· Trying to copy more than 30 originals at a time.
If the problem still exists:
Place a service call.
Status
Code
Description/Direction