Xerox 750DX 5750 Error Codes List - Page 3

Introduction This section contains status code procedures. Each procedure represents a status code, or group of status codes that may be displayed, indicating a problem. The status codes are numerical (e.g. 5-901), with the number to the left of the hyphen indicating the area of the machine and the remaining digit(s) indicating a particular fault to that area. Using the example of status code 5-901, the first number (5) indicates that the fault has occurred in the ADF (Automatic Document Feeder). A "10-106" code would indicate a duplex jam. To access the correct procedure, use the section content page to locate the indicated status code and the appropriate page number. The Status Code Entry Table is composed of two columns. The left column contains the status code fault indicator. The right column includes a description of the fault and the actions to take in resolving the problem. The actions are the "most likely" suspects. In each case, if you try to resolve the fault and all attempts fail, you are directed to call for service. Anytime the fault code is not listed, or if you are unable to clear the problem within reasonable time you should call for assistance. Always follow the Repair procedures carefully. Whenever directed, be sure to Switch off the Main Power Switch and disconnect the Power Cord. Always Heed The Following Warning..... WARNING Switch off the Main Power Switch, and disconnect the Power Cord. Install Lockout tag. Failure to do so could result in severe electrical shock. Table 1. Fault Code Subsystems Area Description 02 User Interface 03 IOT 04 Machine Clock 05 ADF Failures 06 Scanning/ROS/Communications failure 07 Paper Trays 08 Paper Tray/Registration Jams 09 Developer/Toner/ADC 10 Fuser 11 Sorter 15 PWB Failure 18 PWB Read/Write Error 5/98 5750 DocuCare Service Manual 2-3 Fault Code Procedures