Xerox 750DX 5750 Error Codes List - Page 4

DocuCare Service Manual, Entry Flow Chart

Page 4 highlights

Section 2 Entry Flow Chart Start Here The display screen NO appears to be functioning properly YES Call for service Press the Stop button on the Control Panel. A NO status code is shown on the Display Screen. YES The Status Code is accomp- NO anied by a Jam Message YES A Status Code 5-xxx NO is displayed YES Go to the Status Code Entry Table 1 in this section. The following components are functioning properly: -Control Panel Push buttons -Control Panel LEDs -LCD Touch Screen -Edit Pad YES Go to the Status Code Entry Table 1 in this section. NO Call for service One of the following paper tray related problems is occurring: -Incorrect Paper Size sensing NO -Paper not sensed in trays -Paper tray binding -Tray fault message -Incorrect Paper/image orientation YES Go to the Paper Jam Entry Flow Chart. Next page. Go to the Paper Jam Entry Flow Chart. Next page. The machine is operating but an operator message is displayed. YES Switch the power off, wait 5 seconds, switch NO the power on. The message clears. YES Go to Final Actions Section 1 Call for service Fault Code Procedures 5/98 2-4 5750 DocuCare Service Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

5/98
Fault Code Procedures
2-4
5750 DocuCare Service Manual
Section 2 Entry Flow Chart
YES
NO
The display screen
appears to be funct-
ioning properly
Call for service
Call for service
Press the Stop button
on the Control Panel. A
status code is shown on
the Display Screen.
The following components
are functioning properly:
-Control Panel Push buttons
-Control Panel LEDs
-LCD Touch Screen
-Edit Pad
One of the following paper
tray related problems is
occurring:
-Incorrect Paper Size sensing
-Paper not sensed in trays
-Paper tray binding
-Tray fault message
-Incorrect Paper/image orientation
The Status Code is accomp-
anied by a Jam Message
YES
NO
YES
YES
NO
A Status Code 5-xxx
is displayed
YES
NO
Go to the Status
NO
YES
The machine is operating
but an operator message
is displayed.
YES
Go to the Paper
Jam Entry Flow
Chart. Next page.
NO
Switch the power off,
wait 5 seconds, switch
the power on. The
message clears.
YES
NO
Go to Final Actions
Section 1
Start Here
Go to the Paper
Jam Entry Flow
Chart. Next page.
Call for service
Code Entry Table 1
in this section.
Go to the Status
Code Entry Table 1
in this section.