Xerox 750DX 5750 Error Codes List - Page 20
Check for obvious damage, missing or broken Drive Motor gear assemblies and drive belts. These
![]() |
UPC - 042215455060
View all Xerox 750DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Status Code 07-281, 282, 283, 284 Description/Direction The control logic sensed a timing error for the Lift Up Time of Tray 1(07-281), Tray 2 (07-282), Tray 3 (07-283) or Tray 4 (07-284). Initial action: Switch off the machine power. Power the machine on. If the problem still exists: Place a service call. Tray Load Paper for Tray 1, Tray 2, Tray 3, Tray 4, or the Bypass Tray The control logic has sensed that no paper is being detected in one of the paper trays. Initial action: Go to the Paper Tray which was selected on the Control Panel and verify that the Paper Size Indicator is set to the correct paper size that is loaded in the Paper Tray. Go to the Paper Tray which was selected on the Control Panel and verify that the paper is loaded correctly. For the appropriate tray, clean the Tray Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth (water). (REP 5.22) (REP 5.24) NOTE : Check for obvious damage, missing or broken Drive Motor gear assemblies and drive belts. These items may cause a sensor failure to be displayed as an operator error message. If the problem still exists: Place a service call. Fault Code Procedures 5/98 2-20 5750 DocuCare Service Manual
![](/manual_guide/products/xerox-750dp-5750-error-codes-list-a584f9e/20.png)