Xerox 750DX 5750 Error Codes List - Page 5

Paper Jam Entry Flow Chart Start Here The paper trays and assemblies slide out NO Call for service and in without binding A YES Open the front doors and pull out the Transfer Belt Module. Clear the paper NO path of any jams and inspect the Transfer Belt. The Transfer Belt is out of alignment. Close all of the doors. Switch on the power. NO The paper jam message is displayed immediately at power on. YES YES Go to the Status Code Entry Table/ (08-900 code) Perform the Transfer Belt Walk Adj. Select Trays 1, 2, and 3 while observing the display screen. All three trays can NO be selected without a tray fault being indicated. YES Call for service Verify that paper is loaded into all of the paper trays. Select Trays 1, 2, and 3 NO while observing the screen. The presence of paper in each tray is being detected. YES Call for service Make several copies to try to duplicate the NO paper jam. A paper jam occurs. YES Enter diagnostics. Select History Files and Jam counter. Scroll through the counter and determine which jams have occurred most frequently. Refer to the appropriate jam code in the Status Code Entry Table. While observing the Touch Screen, select each of the paper trays and individually open and close each paper NO tray. The position of the paper trays, open or closed, is being detected correctly. YES Call for service Press and hold the Stop button on the Control Panel. Record the jam code. Refer to the appropriate paper jam code in the Status Code Entry Table. Check the size of the paper loaded into the trays and compare it to the NO size indicated on the Touch Screen. The paper size is correctly detected. YES Call for service A 5/98 5750 DocuCare Service Manual 2-5 Fault Code Procedures