Xerox 750DX 5750 Error Codes List - Page 24

Status Code 08-168 Description/Direction The control logic sensed a timing problem from the Misstrip Jam Sensor. Initial action: Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner. Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth (water) (REP 5.22) (REP 5.24). Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10). Check for excessive wear, damage or proper installation of the Stripper Finger. Check for a broken or arcing Transfer Corotron (TC) wire (REP 5.17). If the problem still exists: Place a service call. 08-169 The control logic sensed a timing problem from the Stripper Jam Sensor. Initial action: Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner. Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth (water). Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10). Check for excessive wear, damage or proper installation of the Stripper Finger. Check for a broken or arcing Transfer Corotron (TC) wire (REP 5.17). If the problem still exists: Place a service call. Fault Code Procedures 5/98 2-24 5750 DocuCare Service Manual