Xerox 750DX 5750 Error Codes List - Page 18

Status Code 06-372 Description/Direction The control logic sensed that the Polygon Motor failed to operate. Initial action: Switch off the machine power Verify that the Drum Unit is firmly seated and that the screws that hold the unit in place are installed (REP 5.4). Power the machine on. If the problem still exists: Place a service call. 06-380, 384 The control logic sensed a timing problem with the ROS (Raster Output Scanner). Initial action: Switch off the machine power. Wait ten seconds Power the machine on. If the problem still exists: Place a service call. 06-389 The control logic sensed a timing problem with the Scan Carraige at End of Scan (EOS). Initial action: Switch off the machine power. Wait ten seconds. Power the machine on. If the problem still exists: Place a service call. Fault Code Procedures 5/98 2-18 5750 DocuCare Service Manual