Xerox 8200B Network Users Guide - Page 37
Novell NetWare 3.x/4.x/5.x Network, Configuration software for NetWare networks, Quick setup - indicator
![]() |
UPC - 095205082128
View all Xerox 8200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Phaser® 8200 Color Printer Novell NetWare 3.x/4.x/5.x Network This section provides installation and troubleshooting steps for Novell NetWare (3.x/4.x/5.x): I Quick setup - see page 32. I Advanced setup - see page 33. I NetWare 3.x/4.x/5.x print server setup - see page 33. I Setup with CentreWare DP - see page 33. I Novell NetWare troubleshooting - see page 34. Configuration software for NetWare networks For Windows environments, the following software is available: I CentreWare DP - Use this application to configure the printer and the network when using NetWare 3.x, 4.x and 5.x. See the Advanced Network Management Tools CD-ROM for the CentreWare DP software and documentation. I Novell NWAdmin - Use this utility to manage existing queues on networks running NetWare 4.x or 5.x in NDS or NDPS/NEPS mode. The Configuration Pages report information that you need for NetWare configuration. On the Configuration Pages, all zeros in the IPX Networks fields indicates that the printer does not recognize the network connection; this probably indicates a faulty cable connection, an incorrect frame type, or Reply to Get Nearest Server has not been set to On. It must be set to On for at least one file server or router on the same segment as the printer. Note For more information about the Xerox NDPS/NEPS solution, see the CentreWare for NDPS User Guide on the Advanced Network Management Tools CD-ROM or see the Xerox web site at www.xerox.com/officeprinting/support. Quick setup 1. Print the Configuration Pages and retain them for reference. For information on printing Configuration Pages, refer to the Front Panel section of the Features Guide on your printer's CDROM. 2. Check the Configuration Pages and verify that Novell enable=On and correct Frame Type is set. 3. Install CentreWare DP from the Advanced Network Management Tools CD-ROM on a Windows-based workstation. 4. Run the CentreWare DP application and choose Setup Wizard from the Printer menu. NetWare 3.x users should select the bindery server install and follow the Setup Wizard steps. NetWare 4.x and 5.x users should select the NDS install and follow the Setup Wizard steps. 5. Install print drivers from your printer's Software and Documentation CD-ROM. 6. Send a print job to the printer. Copyright © 2002 Xerox Corporation. All Rights Reserved. 32
![](/manual_guide/products/xerox-8200b-network-users-guide-55d0251/37.png)