Xerox M20I System Administration Guide - Page 101

Network Installation Using Internet Services 6 ¾ Enter the [NDS Tree] and [NDS Context] if using NDS. 7 ¾ Enable the [Service Advertising Protocol (SAP)]. 8 ¾ Enter the [Primary File Server] name, if using Bindery. 9 ¾ Click the [Apply] button to implement any changes. NOTE: Click the [Undo] button to cancel any changes made and return to the previous values. 10 ¾ Select the [Status] tab and then select [Reset Network Controller] to enable the selections to take effect. 11 ¾ Continue with Test Print. Test Print To ensure the device has been installed on the network correctly a test print should be submitted from a client workstation. Perform the following steps: 1 ¾ Open a document on a client workstation. 2 ¾ Select the device as the printer to which the selected document will be sent. 3 ¾ Print the document on the device and verify that it prints correctly. 4 ¾ Ensure the driver is installed on every workstation that will be sending jobs to the device. 5 ¾ Repeat the test for all workstations that will be sending jobs to the device. 6 ¾ The installation process is now complete. If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures. Xerox WorkCentre M20i System Administration Guide Page 7-13